
Basement Floor Epoxy Coating in Denver, CO
Denver Superior Epoxy Flooring offers professional basement floor epoxy coating in Denver, CO, and every basement we price gets a free moisture test first. Below-grade slabs push water vapor up from the soil, so we run a calcium chloride test under ASTM F1869 or in-situ RH probes under ASTM F2170 before choosing a primer. Then we diamond grind to CSP 2-3 and build a flake, solid-color or metallic system on 100% solids epoxy.
A coated basement floor cleans easier than carpet, shrugs off a water heater drip and brightens a dark room. Basement systems run $5.50 to $8.50 per sq ft, take 1 to 2 days to install, and carry a 10-year warranty.
Get a FREE Estimate
Or call (720) 953-6574
Basement Floor Epoxy Options
Basements get used for everything, so the system follows what the room is for.

Flake Epoxy Basement Floors
Full-broadcast flake is the all-rounder for rec rooms, playrooms and storage. It hides the cracks and patches that most older basement slabs carry, and the texture helps if the floor ever gets wet.

Solid-Color Basement Laundry and Utility Floors
A light gray or tan epoxy with a polyaspartic top makes a dark utility room brighter and shows leaks right away. It's the simplest system and sits at the low end of the basement price range.

Metallic Epoxy Basement Living Spaces
For a finished family room, home theater or bar, metallic epoxy gives a floor with depth and movement. It's a 3-day install at $9 to $14 per sq ft.

Stained or Polished Basement Concrete
If you'd rather have no coating at all, a basement slab can be acid stained and sealed or ground and polished. Both show the slab's character, patches included.

Basement Home Gym Floors
A flake or solid epoxy floor under rubber mats in the lifting area keeps the rest of the gym easy to wipe down. Mats take the impact, and the coating handles sweat and spilled water.

Walkout Basement Entry Floors
Walkout basements get sun through the patio door and snow tracked in from the yard. We put a UV-stable polyaspartic topcoat and a little grit near the door, so the floor by the glass doesn't amber or turn slick.
Before and After
Basement Moisture Testing Comes First
More basement coatings fail from moisture vapor than from anything else. Water moves up through the slab as vapor, gets trapped under a coating and pushes it into blisters. You can't see it happening until it's too late.
So we measure it. A calcium chloride dome sits on the slab for 60 to 72 hours under ASTM F1869, or RH probes go into drilled holes for 24 hours under ASTM F2170. If the slab reads over 3 lbs per 1,000 sq ft per 24 hours, or over 80% RH, a moisture-mitigating epoxy primer goes down first. That adds $2.00 to $3.50 per sq ft.
Vapor and liquid water are different problems. If water is coming through a crack or pooling after storms, that's a waterproofing or drainage job, and it needs fixing before any floor goes down.
Colorado Basement Slabs and What They Mean for a Coating
Front Range basements have a few quirks that a coating has to work around.
Floating Slabs and Expansive Soil
Many metro basements are built with a floating slab that isn't tied to the foundation walls. Finished partition walls are often hung with a gap at the bottom so the slab can move. We coat the slab without bridging it to the walls. Cracks from new movement aren't covered by any honest warranty, ours included, but we fill them at our standard repair rate.
Radon Mitigation Pipes
A lot of Colorado basements have a radon system with a suction pipe through the slab. We coat neatly up to it and leave its seal intact. A coating isn't radon mitigation, so don't remove or modify a working system on our account.
Drains, Sump Pits and Structural Wood Floors
Floor drains and sump pit edges get coated to the rim and left open. Some newer homes on swelling soils have a framed wood floor over a crawl space instead of a slab. Epoxy needs concrete, so we'll tell you that on the phone.
Who Basement Floor Epoxy Makes Sense For
It's a good fit if you're finishing a basement and want a durable floor without carpet. It's also right for a laundry or mechanical room where bare concrete dusts and stains, and for a gym, craft room or play area that needs wiping down.
It's a poor fit if the basement takes on liquid water, if the slab is actively heaving, or if you plan to put carpet down within a year anyway. In those cases we'll tell you to spend the money somewhere else first.
Basement Epoxy Pricing and Timeline
Flake and solid-color basement systems run $5.50 to $8.50 per sq ft with the moisture test included. Metallic runs $9 to $14 per sq ft. A moisture-mitigating primer, when needed, adds $2.00 to $3.50 per sq ft, and removing an old coating adds $1.50 to $3.00 per sq ft.
The calcium chloride test needs 60 to 72 hours on the slab before install day, or 24 hours for RH probes. Installation itself takes 1 to 2 days for flake or solid systems and 3 days for metallic. Basement systems carry a 10-year warranty.
Timing with a remodel matters. Coating before the drywall and trim go in is easiest, because we can grind right to the foundation wall. If the basement is already finished, we hand grind along the baseboards and protect the walls, and the floor still goes down in the same 1 to 2 days.
Start With a Free Basement Moisture Test
Call (720) 953-6574 to book an estimate. Kyle will measure the basement, set up the moisture test and give you a written price once the numbers are in.