Serving Denver and the Denver metro since 2007
Licensed & InsuredFree EstimatesMon-Fri 7am-5pm
(720) 953-6574 Licensed & Insured
Get a Free Floor Estimate
Flake Epoxy Flooring in Denver, CO

Flake Epoxy Flooring in Denver, CO

Denver Superior Epoxy Flooring offers professional flake epoxy flooring in Denver, CO, backed by 19 years and 5,200+ floors. A flake epoxy floor is a 100% solids epoxy base coat with vinyl flake broadcast into it while it's wet, locked under a clear polyaspartic topcoat. We broadcast to full coverage on every job, which builds the system to 25 to 30 mils.

Flake is the most forgiving finish we install. The chips hide hairline cracks, old stains and uneven troweling, and the light texture grips better than a smooth gloss when the floor's wet. We use 1/4 inch flake as standard, with 1/8 inch and 1/16 inch for a tighter look, and the sample boards stay with you overnight.

Get a FREE Estimate

Or call (720) 953-6574

  • Full broadcast on every floor, never a sprinkle
  • Flake in 1/4, 1/8 and 1/16 inch sizes
  • Sample boards left with you overnight
  • Built to 25 to 30 mils, not a thin kit

Flake Epoxy Flooring Options

Same base coat and topcoat underneath. What changes is how much flake goes down, how big it is and which room it's in.

Full-Broadcast Flake Floors

Full-Broadcast Flake Floors

Flake goes into the wet base until it rejects any more, then the excess is scraped and vacuumed off. You see flake wall to wall with no base color peeking through. It's the toughest and most slip-resistant version, and it's what we put in garages.

Partial-Broadcast Flake Floors

Partial-Broadcast Flake Floors

Flake is scattered at a lighter rate so the solid base color shows between the chips. Some people want that look for a basement or a craft room. It's smoother underfoot and less forgiving of slab blemishes, and the topcoat carries more of the wear.

1/4 Inch Flake Blends

1/4 Inch Flake Blends

The standard size for garages and big rooms. From standing height the larger chips read like a granite speckle and hide the most dirt. Gray, tan and black blends are popular because they don't show road grime between sweeps.

1/8 and 1/16 Inch Micro Flake

1/8 and 1/16 Inch Micro Flake

Smaller chips give a tighter, almost terrazzo-like texture. They suit laundry rooms, mudrooms, basement gyms and commercial restrooms where people see the floor up close. Same base, same topcoat, same thickness.

Flake Floors for Basements and Mudrooms

Flake Floors for Basements and Mudrooms

Flake works anywhere concrete does, as long as the slab passes a moisture test. Below-grade floors get a free calcium chloride or RH probe test first, and a moisture-mitigating primer when the numbers call for it.

Before and After

Stained bare concrete by the house steps in a Denver garage before a flake epoxy floor
Same garage corner with a glossy full-broadcast blue gray flake epoxy floor
Typical before and after: a stained garage corner coated with full-broadcast vinyl flake under a clear polyaspartic topcoat

Why Flake Epoxy Floors Hold Up on Metro Slabs

Flake isn't only decoration. Each chip sits in the base coat at its own angle, and the topcoat wraps around them. That gives the topcoat a mechanical grip instead of resting on a flat, glossy surface.

It also gives you traction. A smooth epoxy floor with a puddle of snowmelt on it is slick. Full-broadcast flake leaves a fine texture you can feel through your shoes, and we can add grit to the topcoat on ramps and steps.

And it hides things. Garage and basement slabs around here often carry shrinkage cracks, trowel marks and old oil stains that a solid color would show. After we chase and fill the cracks, the flake disguises the patch lines.

Choosing a Flake Blend You'll Still Like

People spend more time on color than anything else, and it's worth it. Here's how we'd pick.

Look at Samples in Your Own Light

Flake looks different under a fluorescent shop light, a warm LED and late sun through the garage door. That's why the boards stay overnight. Look at them first thing in the morning and again in the evening before you decide.

Pick for Dirt, Not Only Color

Mid-tone blends with some black and tan hide dust, pet hair and road grime. Very light blends look great on install day and show every tire mark. Very dark blends show dust and the white film mag chloride leaves behind.

Match Flake Size to the Room

Garages and large rooms carry 1/4 inch flake well. Small rooms, stairs and bathrooms look better in 1/8 or 1/16 inch, which reads finer when you're standing right over it.

Flake Epoxy Flooring Cost

A full-broadcast flake system with an epoxy base and polyaspartic topcoat runs $6.50 to $9.00 per sq ft. On a one-car garage that's $1,800 to $2,600, and on a two-car garage $2,800 to $4,300.

That price includes grinding to CSP 2-3, crack repair, the flake and the topcoat. In a garage it carries our 15-year residential warranty against peeling, delamination and hot-tire pickup.

How a Flake Epoxy Floor Is Installed

  1. Pick the Blend

    You keep the sample boards overnight and confirm the blend and flake size. We order enough flake for full broadcast plus a reserve for future repairs.

  2. Grind and Fill

    The slab is diamond ground to CSP 2-3. Cracks are chased, filled and ground flush so they don't telegraph through the flake.

  3. Base and Broadcast

    The crew rolls the 10 to 12 mil base coat in sections and broadcasts flake into each one while it's still wet, until it won't take more.

  4. Scrape and Inspect

    After the base cures, loose flake is scraped with floor scrapers and vacuumed. The crew lead checks for thin spots before any topcoat goes on.

  5. Clear Topcoat

    Polyaspartic goes on at 8 to 10 mils. You can walk on it in 4 to 6 hours and park on it in 24 hours.

Flake Epoxy Floor Questions

Is a flake floor slippery when it's wet?

Less than a smooth gloss floor. Full broadcast leaves a fine texture under the topcoat. For ramps, steps or a garage that gets a lot of snowmelt, we add grit to the topcoat for more bite.

Can you match a flake floor I already have?

We can get close, but flake batches vary and an older floor has aged under light. For an addition we usually suggest a border or a contrasting section so the seam looks planned.

How do I clean a flake epoxy floor?

Sweep or dust mop, then wash with a pH-neutral cleaner. Skip acidic or citrus degreasers, and give it the full 7-day cure before any heavy cleaning.

Will the flakes chip off?

The flakes are locked under the topcoat, so they don't flick off like paint chips. A hard impact can gouge any floor. Spot repairs carry a $495 minimum and a 2-year workmanship warranty on the repaired area.

Can I get a flake floor in my basement?

Yes. Every basement gets a free moisture test first. If the slab reads over 3 lbs per 1,000 sq ft per 24 hours or 80% RH, a moisture-mitigating primer goes down before the base coat.

See Flake Samples on Your Own Floor

Call (720) 953-6574 to book a free estimate. Kyle brings the sample boards, measures the room and leaves you a written per-square-foot price before he goes.