
Patio and Outdoor Concrete Coatings in Denver, CO
Denver Superior Epoxy Flooring offers professional patio and outdoor concrete coatings in Denver, CO, using UV-stable polyaspartic systems instead of the epoxy that yellows outdoors. We grind the slab to CSP 2-3, patch freeze-thaw spalls and build a textured, slip-resistant concrete coating with grit in the topcoat. Outdoor coatings run $6 to $10 per sq ft and carry a 5-year warranty against peeling and UV yellowing.
We coat back patios, front porches, steps, walkways and pool decks. A coated patio sheds spilled grease and wine, stops the surface from dusting and keeps water from soaking into the top of the slab, which is where freeze-thaw damage starts. A coating can't fix a slab that's broken up or badly heaved, but it gives a sound one a much better surface.
Get a FREE Estimate
Or call (720) 953-6574
Patio and Outdoor Concrete Coating Options
Every outdoor system we install shares the same UV-stable top. The look and texture underneath change.

Flake Patio Coatings
Vinyl flake broadcast into the base coat gives a speckled, stone-like look that hides leaves, dirt and old stains. The polyaspartic topcoat with grit keeps it walkable when it's wet.

Textured Solid-Color Patio Coatings
A single tan, gray or sandstone color with a textured finish gives a clean, modern patio. Lighter colors stay cooler underfoot in summer sun than dark ones.

Pool Deck Coatings
Pool decks get a lighter color and more grit than a patio, since bare feet and splashed water are constant. The coating also seals the concrete against pool chemicals.

Front Porch, Step and Walkway Coatings
Steps get extra grit on the treads and a careful edge on the nosings, since they're the first thing to get icy. Walkways can match the porch so the entry looks finished.

Covered Patio and Three-Season Room Floors
Covered patios and enclosed porches get less direct sun but still see UV through the open sides and screens. A flake or solid polyaspartic system makes them easy to hose off after a dusty spring wind or a snowmelt drip.

Patio Coatings Matched to the Garage
If we're coating the garage, the patio or front walk can take the same flake blend in its outdoor version. The entry, garage and back patio end up looking like one plan instead of three projects.
Before and After
Why Outdoor Concrete Needs a Different Coating at 5,280 Feet
UV is harder on coatings up here than at sea level, and patios take it all day. Standard epoxy is an aromatic resin, and sunlight breaks it down. On a west-facing patio it can turn the color of weak tea and go chalky in a single summer.
We've ground off more than one of those. The fix is an aliphatic polyaspartic topcoat, which doesn't yellow in UV and stays flexible enough to ride out the big day-to-night temperature swings Colorado slabs see.
Color choice matters too. Lighter colors reflect more sun and stay cooler underfoot, which is why we steer pool decks and south-facing patios away from dark grays.
Freeze-Thaw, Deicer and Drainage
Outdoor slabs deal with constant water and temperature shifts. A coating helps protect the surface, but you have to repair the slab first.
Outdoor concrete expands and contracts constantly between cold nights and sunny afternoons. A polyaspartic system flexes with that movement. Brittle epoxy tends to crack and flake at the edges first.
Spalling
When water gets into the surface and freezes, it pops the top layer off. We grind away loose material and patch spalled areas before we apply a coating. Heavy spall repair costs between $6 and $12 per sq ft of damaged area.
Deicer on Steps and Walks
Magnesium chloride and rock salt eat at bare concrete. On a coated step they sit on top and rinse off. Use a plastic shovel, not a steel ice chopper, which will gouge any coating.
Slope and Ponding
A coating doesn't change how a slab drains. If your patio holds water or slopes toward the house, that needs fixing by a concrete or grading contractor. We'll point it out at the estimate.
When to Coat a Patio in Colorado
Outdoor coatings need a dry slab and reasonable temperatures to cure properly, so most patio work happens from spring through fall. We start early in the day so the coating has warmth and daylight to cure before evening.
Rain or a cold snap in the forecast means we move the date. A new patio has to wait 28 days after the pour before it can be coated. If you're planning a fall project, call early, because patio dates fill up before the weather turns.
Install day itself is simple. The crew grinds and repairs in the morning, puts down the base and flake, then rolls the polyaspartic topcoat with grit. You can walk on it in 4 to 6 hours. Keep grills, planters and furniture off until the next day, and hold off on harsh cleaners until the 7-day full cure.
Outdoor Coating Prices and Warranty
Patio, porch and pool deck coatings run $6 to $10 per sq ft, with grinding, crack repair and grit included. Heavy spall repair is the main extra at $6 to $12 per sq ft of damaged area, and stripping an old failed coating adds $1.50 to $3.00 per sq ft.
Every outdoor coating carries our 5-year warranty against peeling and UV yellowing. Impact damage and new cracks from slab movement aren't covered, but we chase and fill those at our standard repair rate.
Upkeep is a broom, a hose and a pH-neutral cleaner. Put pads under metal furniture feet so they don't scratch the topcoat, and lift planters now and then so water doesn't sit under them all summer.
Get Your Patio Coating on the Schedule
Call (720) 953-6574 to have your patio looked at. We'll check the slab for spalling and drainage, show you colors in daylight and give you a written price.